Deck Mounted Liquid Bowser

Designed to be placed in a trailer or in the bed of a UTV or 4×4 pick-up (or similar). 270 litre capacity gets liquid to where you need it. Easy to fill. Vented cap means easy to empty.

The DMB300 Deck Mounted Liquid Bowser is very easy to use: fill the tank through the wide filling aperture; fit the cap and transport the contents to the destination; then use the 2″ diameter outlet pipe with ¼ turn tap to empty the liquid to wherever it needs to be. The cap is vented so there is no need to loosen it during the emptying process. The tank itself is made using the rotational moulding method and is extremely strong. A very simple and convenient way to carry liquids.

£910 + vat

Three Point linkage Bowser TPB300

The TPB300 Three Point linkage Bowser gives you the flexibility to transport water or other liquids quickly and easily.

This is a very easy unit to use: fill the tank through the wide filling aperture; fit the cap and transport the contents to the destination; then use the 2″ diameter outlet pipe with ¼ turn tap tap to empty the liquid to wherever it needs to be.

The cap is vented so there is no need to loosen it during the emptying process. The tank itself is made using the rotational moulding method and is extremely strong. The Three Point linkage Bowser TPB300 - a very simple and convenient way to carry liquids.

£1305 + vat

Trailed Bowser SLB400

A Trailed Bowser provides a quick and easy way to get fresh water or liquid feed to the location of your choice.

This 270 litre Trailed Bowser has a large diameter ventilated lid at the top of the unit to enable easy filling and the outlet is a 1.8m pipe (2 inch diameter) with a ¼ turn tap. Fill the tank from the supply - empty the tank via the pipe into your troughs or wherever it’s needed.

£1230 + vat

Trailed Bowser Range

A Trailed Bowser provides a quick and easy way to get fresh water to the location of your choice.

This 600 litre Trailed Bowser has a large diameter ventilated lid at the top of the unit to enable easy filling and the outlet is a 3.5m pipe (2 inch diameter) with a ¼ turn tap. Fill the tank from the supply – empty the tank via the pipe into your troughs or wherever it’s needed.

SLB620 Trailed Bowser – the 600litre bowser range starts with a gravity feed bowser

SLB620H Trailed Bowser – if required you can specify an engine/pump which discharges the contents into elevated tanks or troughs. With a powered pump there is also an option of a suction hose kit  which allows you to “self-fill” the bowser from any available fresh water source.

SLB620HM Trailed Bowser –  this option is primarily designed for the equestrian market to quickly dampen down riding surfaces for dust suppression (please see the equestrian section for more details). However, it can also be used for watering other large areas such as new tree plantations.

£3370 + vat

Hanging Basket Watering System

A bowser provides a quick and easy way to get fresh water to the location of your choice.

This model is designed to allow quick and easy watering of hanging baskets and is equally efficient when watering flower beds and other planted areas.

This self-contained 600litre trailed unit with its own engine driven pump offers total flexibility as it can be towed by any vehicle with a tow-bar, rather than having to be towed by a tractor and powered by its PTO (power take off).

The flexibility of a simple, manual hose reel with 15m of hose allows the operator to  walk between watering areas. An optional 1″(25mm) self-fill hose gives the option of collecting water from a natural source eg. lake, stream, etc.

This is part of a range of bowsers which Logic offers – for other similar models, see the following:

SLB400 – 270litre trailed gravity feed bowser

SLB620/H/HM – 600litre gravity feed/engine bowser range.

£3510 + vat