Pro Sweep MSP Muck collector

The new Logic MSP120 ‘Pro-Sweep’ Horse Muck Collector has been developed from our hugely successful MSC sweeper.

Since its introduction, Logic have sold thousands of Pro Sweep MSP sweeper-collectors, the prime use being for quickly and efficiently picking up horse muck. If you are interested a  muck collector for your setup, please click HERE

Another important customer group is llama and alpaca farmers – the principles of muck removal are the same, even though the nature of the droppings are completely different. The Pro-Sweep does the same efficient job, saving many hours of valuable time and effort. If this is your requirement please speak to Logic for further advice and customer referral.

£5215 + vat

ATV Power Brush S215

Mounting this 1.35m wide power brush onto the front of your quad or UTV (you’ll need a Logic System20 chassis attachment to do this) enables the fast and efficient clearing of any yard, drive, road, etc..

The ATV Power Brush is capable of sweeping leaves, dirt, general debris – the dirtier the surface, the better the power brush performs.

Having a System20 front-mounted chassis enables you to fit other attachments as well. There is a snow-plough blade, a yard-scraper and a non-powered sweeping brush which is a lower cost implement for lighter duties.

Why do I need one?

The ATV Power Brush will quickly and efficiently clear any yard, drive or roadway. It will also clear light snow on driveways and paths.

How does it work?

The ATV Power Brush has its own 5.5hp engine and a raise/lower device which can be either manual or electric. Simply start the engine then lower the brush to the surface. There’s a special end brush to get right up to kerbs, walls and so on, plus an accurate height control to ensure correct pressure on the surface and maintains the long life of the brush.

£4145 + vat

Power Brush UTS215HR

The Logic UTV Power Brush has a 1.68m rotating brush which is mounted onto a chassis that fits onto the front of a UTV.  

The accurate brush height control is easy to set with a fine threaded height adjuster which means that brush wear is kept to the minimum. The standard unit is fitted with an electric lift raise/lower facility which allows the operator to place the brush in and out of work from within the cab via the wired remote control box.

The brush can be used straight or at varying angles to the left or right. This facility is also operated from the in-cab remote control box via a second electric ram.

Product features

The Logic UTS215 UTV Power Brush has a 1.68m working width and a 5.5 hp petrol engine to provide ample power. The unit has a special end brush on one side which allows you to sweep right up to the edge of the kerb, building, etc. and can be set for left or right hand use.The brush is a quick-mount unit, designed to be used in conjunction with a Logic System 20 chassis. The System 20 chassis is mounted onto a suitable UTV (contact Logic to determine the model for your vehicle) and this provides the basis for mounting various attachments, including snow ploughs with widths of 1.5m and 1.7m, a fixed, non-powered brush and a general yard scraper.

£5065 + vat

S228 ATV Snow Plough 1.5M

This is the ‘professional’ version of the S221 quick-attach ATV snow plough. In common with the S221 it is a very competent performer when it comes to clearing snow up to 30 cm in depth.

The S228 benefits from a clever ‘break back’ system: if the blade should hit a hidden obstacle under the snow (for example, a raised manhole cover) the blade snaps forward, releasing the bottom edge from whatever it has caught on. The spring mechanism then snaps the blade back into operation so you can continue to clear snow without dismounting to reset the unit.

Attached to the ATV using Logic’s System 20 chassis, it can be angled to the left or right to clear snow in either direction.

It is lifted in and out of work using a very simple but effective manual lift lever which operates an over-centre cam. The System 20 chassis must be fitted to the ATV but once done this does not compromise the operation of the vehicle in any way. When the snow plough (or any other System 20 implement) is needed it is attached in seconds using pins and clips. This makes it a very quick and easy method of carrying out snow clearance tasks whenever it is needed. To extend the life of the ATV snow plough, the rubber wearing strip along the bottom of the blade is replaceable.

£955 + vat

​

S221 ATV Snow Plough 1.4M 

The S221 (1.4m) Snow Plough is a System 20 attachment and is designed to quickly and easily clear snow from yards, roadways and pathways.

Keeping everything moving in the winter months can be a major headache, particularly after even a modest fall of snow. These workhorses from Logic provide a go-anywhere snow plough that has a surprisingly high work rate. Their compact size means that snow can be successfully cleared from even limited access spots. Roadways, yards and car parks can be quickly cleared, allowing access even in bad weather.

£680 + vat

​

UTV Snow Plough UTS201 - 1.8M

Professional snow plough designed to be used by UTVs fitted with a System20 front mounting system.

Very capable snow clearance implement capable of high work rates. 12v ram provides electric lift for convenient control from the cab of the UTV. All wiring and control box provided.

This is the UTV version of the S228 quick-attach snow plough. The extra width and power of a UTV means that the blade can be wider than ATV snow ploughs and this unit is 1.8m. In addition, because UTVs have a cab with windscreen, the simple, manual lift lever found on our ATV snowploughs is not desirable and operators benefit from the convenience and speed of in-cab 12v electric raise and lower facility.

The UTS201 is a very competent performer when it comes to clearing snow up to 30 cm in depth. The UTS201 also benefits from a clever ‘break back’ system: if the blade should hit a hidden obstacle under the snow (for example, a raised manhole cover) the blade snaps forward, releasing the bottom edge from whatever it has caught on. The spring mechanism then snaps the blade back into operation so you can continue to clear snow without dismounting to reset the unit.

Attached to the UTV using Logic’s System 20 chassis, the snowplough can be angled to the left or right to clear snow in either direction. It is lifted in and out of work using a very simple but effective manual lift lever which operates an over-centre cam.

The System 20 chassis must be fitted to the UTV but once done this does not compromise the operation of the vehicle in any way. When the snowplough (or any other System 20 implement) is needed it is attached in seconds using two pins and clips. This makes it a very quick and easy method of carrying out snow clearance tasks whenever it is needed. To extend the life of the snow plough, the rubber wearing strip along the bottom of the blade is replaceable.

£1040 +vat

System 20 Front Mount Chassis - S20

The System 20 Front Mount Chassis is not a universal fitting.

A number of models have been developed to suit the characteristics of most suitable ATVs or UTVs available in the UK.

All models will provide secure and robust fitting solutions for other Logic attachments which will provide speedy solutions to many common tasks, such as cleaning up, yard scraping and snow clearance.

Attachments can be mounted/detached in seconds without the use of tools. Manual lift comes as standard, using an over-centre arm, but an electric lift version is available.

£POA

Yard Scraper S210 - 1.3M

The S210 ATV Yard Scraper is a System 20 attachment and is designed to quickly and easily clear farmyard muck from yards and floors in cow sheds, poultry and pig units, animal houses and cubicles.

Robust construction includes a one-piece, heavy duty steel blade with replaceable rubber bottom blade and wings.

The 1.3m width makes the S210 yard scraper manoeuvrable in confined spaces such as cubicles yet large enough to clear wider areas efficiently.

£670 + vat